Skip to content
VULTAE

Connectors & Protocols

OCPP Smart Charging Profiles Explained

OCPP smart charging profiles limit power from the back end: ChargePointMaxProfile, TxDefaultProfile and TxProfile, stack levels and how they combine.

Prepared by
VULTAE Engineering Team
Published
Reading time
1 min
Sources
1 references

Key takeaways

  1. 1In OCPP, a charging profile is a schedule of power or current limits sent from the back end to a charger. It lets the operator shape load without touching the hardware.
  2. 2OCPP 1.6 defines three purposes: ChargePointMaxProfile (whole charger), TxDefaultProfile (default for new sessions) and TxProfile (one session). A stack level decides which profile wins when several apply.
  3. 3Not every charger implements every profile. Ask for the smart charging feature profile in the supplier’s OCPP conformance statement and test it against your back end.
An engineer at a laptop showing an abstract stepped power chart with a row of chargers in the background
An engineer at a laptop showing an abstract stepped power chart with a row of chargers in the background
Contents
  1. 01The three purposes (OCPP 1.6)
  2. 02How profiles combine
  3. 03Common uses
  4. 04What to ask a supplier

Short answer: an OCPP charging profile is a schedule of limits the back end sends to a charger. There are three purposes — charger maximum, transaction default and transaction — and stack levels decide which profile wins. Confirm that your charger supports the Smart Charging feature profile and test it.

The three purposes (OCPP 1.6)

Purpose Applies to Typical use
ChargePointMaxProfile The whole charger Site limit, grid limit
TxDefaultProfile New sessions by default Default current per connector
TxProfile One transaction Per-vehicle control, solar-following

How profiles combine

  • Each profile has a stack level; the highest valid level wins within the same purpose.
  • The charger uses the lowest result across the applicable limits, so a site limit always holds.
  • A profile has periods with a start time and a limit; it can be absolute, relative or recurring.

Common uses

  1. Peak shaving: lower the limit during peak hours.
  2. Group limits: a site limit shared across chargers — see dynamic load management.
  3. Tariff following: charge more in cheap hours.
  4. Solar following: change the limit as PV output changes.

What to ask a supplier

Question Why
Does it implement the Smart Charging profile? Not all do
Which purposes and stack levels? Determines what you can do
Behaviour if connection is lost Local fallback limit
Version support 1.6J and 2.0.1 differ in details — see OCPP versions

Test the profiles on a sample charger with your back end before ordering — see the sample testing guide.

Questions buyers ask

What is a charging profile?
A set of time periods with a power or current limit. The charger follows the limit while the profile is valid.
What happens when two profiles conflict?
The profile with the higher stack level overrides lower ones for the same purpose, and the most restrictive combination of purposes applies according to the specification.
Does smart charging work without OCPP?
Local load balancing can work without OCPP, using a CT sensor or a local group controller. OCPP smart charging adds back-end control.

References

  1. [1]Open Charge Point Protocol (OCPP). Open Charge Alliance.

Equipment

Chargers referred to in this guide

Tell us what you’re building

Send your market, charger type, power and quantity — our engineers reply with matching models, specifications and pricing.

WhatsAppRequest a quote