Fleet & Heavy Vehicles
Fleet Driver Training for Electric Vehicles: A Charging Checklist
What to teach fleet drivers about charging: plugging in, cables, safety, scheduling, reporting faults and keeping bays free. A practical training checklist.
- Prepared by
- VULTAE Engineering Team
- Published
- Reading time
- 1 min
- Sources
- —
Key takeaways
- 1Charging mistakes cost money: vans left unplugged, cables damaged, bays blocked and faults unreported. A short, practical training removes most of them.
- 2Teach the routine: park, plug in, check the indicator, report problems. Keep it visual and test it with a real charger.
- 3Give drivers a simple way to report faults and know who to call.

Short answer: teach the routine — park, plug in, check the indicator, report problems — with a practical session and a simple fault-reporting path. Keep rules short and visible.
Checklist
| Topic | What drivers should know |
|---|---|
| Parking | Park in the bay so the cable reaches without strain |
| Plugging in | Insert fully, check for the start of charging |
| Indicator | What each light or message means |
| Authorisation | RFID card or app, and what to do if it fails |
| Cable care | No dragging, no driving over, hang it up |
| Unplugging | Stop the session first, then remove the plug |
| Weather | What to do in rain or snow |
| Faults | Whom to call and what to report |
| Bays | Do not block charging bays |
Safety basics
- Do not use a damaged cable or connector.
- Do not open a charger.
- Keep hands dry and avoid wet connectors where possible.
- Report burn marks or heat.
Fault reporting
| Report | Details |
|---|---|
| Which charger | ID on the unit |
| What happened | Error message or behaviour |
| When | Time of the fault |
| Photo | If safe |
Supporting the training
- A one-page guide on the wall.
- A QR code to a short video.
- Review charging data to find missed sessions — see fleet charging reports.
See depot design for the hardware side.
Questions buyers ask
- How long should the training take?
- Typically under an hour including a practical session. Repeat for new drivers and after changes.
- What is the most common mistake?
- Not checking that charging has started. A simple indicator check at plug-in prevents vans from leaving the depot uncharged.
- Should drivers handle faults?
- Only the reporting. They should not open chargers or attempt repairs.


